MAX16151 High Voltage Pushbutton On/Off Controller
Product Details
The MAX16151 is a high voltage, pushbutton on/off controller with a switch debouncer and built-in latch. This device accepts a noisy input from a mechanical switch and produces a clean, latched output, as well as a one-shot interrupt output, in response to a switch closure exceeding the debounce period at active-low PB_IN. A switch closure longer than the shutdown period at active-low PB_IN results in a longer one-shot interrupt output. The MAX16151 family has two sets of devices: one in which a longer switch closure greater than the shutdown period deasserts the latched output, and another in which the latched output stays asserted. See Table 1 for more information.
The MAX16151 operates from a supply range of +5V to +36V and consumes less than 15µA of supply current to ensure minimal battery current in low-power applications. The robust switch input active-low (PB_IN) handles ±60V levels and is ±10kV electrostatic discharge (ESD) protected for use in harsh industrial environments. The 3V regulated latched output can serve as a logic signal to control a pass transistor or voltage regulator. A separate active-low INT output provides a system interrupt whenever a valid pushbutton signal is detected. An asynchronous active-low CLR input allows an external signal to force the latched output to the OFF state. The MAX16151 operates over the -40°C to +125°C temperature range and is available in a 1.23mm x 0.83mm, 6-bump wafer-level package (WLP), and a 6-pin thin SOT23 package.
Applications
- Portable Instruments
- Industrial Equipment
- Desktop and Notebook Computers
- Telecommunication and Servers
Features and Benefits
- Up to +36V Operating Range
- 3.0V Regulated Latched Output
- 10µA Standby Current (ISB)
- Debounces Noisy Switches
- 50ms and 2s Debounce Timing Options
- 8s and 16s Shutdown Periods
- One-shot Active-Low INT Output on Each Switch Closure
- 32ms Active-Low NT Duration
- Pushbutton Input Handle Up to ±60V
- ±10kV HMB ESD Protection
- 6-pin SOT23 and 1.23mm x 0.83mm, 6-bump WLP
- -40°C to +125°C Operating Temperature Range